AD110 Wall Mount Dehumidifier

  • High-quality, wall-mounted model with stainless steel housing.
  • Suitable for rooms up to 100 cbm.
  • Max. dehumidification capacity > 12 l/day.
  • Diagonal airflow (air intake left, air outlet front).
  • Fully-automatic, silent, draught-free operation.
  • Virtually maintenance-free.
  • External pump kit optional.
Aerial make dehumidifier made in Germany.

Related Products

ASE300 aerial desiccant dehumidifier
AP Series indoor swimming pool dehumidifier
WT laundry dryer air dehumidifier
AD540 floor mount dehumidifier
AD 780 industrial dehumidification system

Applications of AD 780

Swimming pool Dehumidifier

Dehumidifier for swimming pool is must have equipment to reduce high humidity generated by pool water surface. AP series wall mounted swimming pool dehumidifier specially designed for indoor swimming pool rooms.

Dehumidifier for Living Spaces

High humidity at homes can cause fungus, molds, bad smell and health issues for you love one. A portable dehumidifier helps to reduce humidity. For bigger home large industrial portable dehumidifier should be use.

Preservation of Artifacts

Air dehumidifier reduces humidity level in Museums, Archives, Exhibitions to protect artifacts and vintage vehicles. Buy dehumidifier from aerial to protect your valuable artifacts from high humidity.

TECHNICAL DATA

Casing

Impact-resistant plastic (grey, RAL 7001, PE polyethylene DIN 16776), operating panel (RAL 1023) and air inlet/outlet (RAL 7021): galvanised sheet steel, flux-coated,  protection class: IP 14

Dehumidifying performance / Power consumption*

at 30°C / 80% r.h.  =  12,0 l/24h   /   280 Watts/h

at 27°C / 60% r.h.  =  6,0 l/24h   /   250 Watts/h

at 20°C / 60% r.h.  =  5,3 l/24h   /      230 Watts/h

at 10°C / 70% r.h.  =  2,5 l/24h   /      210 Watts/h

Air circulation rate

450 cbm/h

Operation range

Temperature: +3°C up to +32°C

Humidity:  40%r.h. up to 95% r.h.

Noise level

46 dB (A)

Voltage

230 V / 50 Hz, Fusing: 6 A slow

Connecting cable

5 mtrs. with plug

Refrigerant

R134a

 

Control elements

Neon green: Operation

Operation time counter

Hygrostat with knob 

 

DIMENTIONS & INSTALLATION

Installation / mobility

Space saving mounting at a wall

(fastening material is included)

Initiation

Put plug into power socket. Switch the dryer on at On/Off switch and set the required humidity at the hygrostat.

Condensate outlet

Condensate-hose (12 x 2 mm, 3 mtr.) serially mounted at the dryer. Hose has to be guided with sloping down from the dryer into a drain.

Air flow

Air inlet at left side with air filter, Air outlet on the front (draught-free, through slanted slats)

Maintenance

clean / change air filter

Dimensions

Height / width / depth: 498 mm / 330 mm / 241 mm

format +971-50-1537113

 

APPLICANTION & FUNCTIONING

Mode of functioning

Condensation principle (heat-pump technology with energy recovery)

Area of use

Closed rooms (water works, sauna rooms, storaging,  archives, ect.)