AD810 Heavy duty Dehumidifier System

  •   Suitable for rooms up to 1,500 cbm.
  • Max. dehumidification capacity >105 l/day.
  • High circulation rate (1,300 cbm/h) for optimum drying times.
  • Energy-saving rotary compressor.
  • On-board condensate pump as standard.
  • Rugged housing, premium-quality finish.
  • Optional: delivery or conversion with kilowatt hour counter.
  • BlueDry® technology for operation at low humidity levels and temperatures.
Aerial make dehumidifier made in Germany.

Related Products

AERCUBE drying system for building and water damage restoration
WT laundry dryer air dehumidifier
AD660 commercial dehumidification unit
AD 780 industrial dehumidification system
AD110 wall mounted dehumidifier


AD810 industrial portable dehumidifier designed with strong steel body. It has maximum dehumidifier capacity of 105 liters per day. Unit supported with strong heavy duty wheels and LCD based control panel. Intake of humid air from back side and outlet from front side. At intake filter is provided. This large dehumidifier can use for large spaces since it fitted with energy efficient axial fan having airflow of 1300 CMH. 

– Fully hermetic rotary compressor.
– Two 2-speed energy efficient EC-axial fans for speed drying and silent drying.
– Maintenance-friendly refrigerant circuit with service connector.
– Condenser and evaporator made of copper tubes with aluminum fins.
– On-demand hot gas defrost system.
– Easy-to-use electronic eDRY: • Display: kWh and operating hours • On / off switch • Display current / rated humidity • desired humidity setting is retained even – after power disconnection • continuous operation • fan power adjustable in 2 steps.

AD810 dehumidication unit pump kit and control panel

Applications of AD 810

Water Management Facilities

Dehumidifier is used to avoid corrosion of equipment & damage of buildings at water treatment Facilities. Aerial offer AD 5 series commercial dehumidifier for for industrial dehumidification at water work facilities.

Industrial dehumidification

Many industrial applications needs low humidity environment during processes & to store furnished goods. Aerial AD 7 series industrial dehumidifier & AD 8 series heavy duty dehumidifier are best in quality and reliability.

Preservation of Artifacts

Air dehumidifier reduces humidity level in Museums, Archives, Exhibitions to protect artifacts and vintage vehicles. Buy dehumidifier from aerial to protect your valuable artifacts from high humidity.



Case made of coated sheet steel in stainless steel finish

Dehumidifying performance / Power consumption*

at 30°C / 80% r.h.  =  105,0 l/24h   /   1.350 Watts/h

at 27°C / 60% r.h.  =  68,0 l/24h   /   1.150 Watts/h

at 20°C / 60% r.h.  =  53,0 l/24h   /      1.000 Watts/h

at 10°C / 70% r.h.  =  20,0 l/24h   /      830 Watts/h

Air circulation rate

Speed 1: 1000 cbm/h

Speed 1: 1300 cbm/h

Operation range

Temperature: +1°C up to +34°C

Humidity:  35%r.h. up to 95% r.h.

Noise level

60 dB (A)


230 V / 50 Hz

Connecting cable

4.5 mtrs. with plug




Control elements

Display: kWh and operating hours, On-/Off-Switch, Display current / rated humidity,

Optionally available accessories

Condensate hose 15 x  2 mm


Installation / mobility

On the floor. Four fixable wheels (D= 100), Two grips


Put plug into power socket. Switch the dryer on at On/Off switch and set the required humidity.

Condensate outlet

Fixed automatic condensate pump with spigots 12 x 2 mm, pumping capacity: max. 4 mtrs. height. Button for manual pumping. (before moving the device)

Air flow

Air inlet at the back side via air filter, air outlet on the front (draught-free, through slanted fins)


clean / change air filter


Height / width / depth

970 mm / 625 mm / 530 mm

format +971-50-1537113



Mode of functioning

Condensation principle (heat-pump technology with energy recovery)

Area of use

Waterworks, storage, basement, garages, archives, etc.