ASE 300 Desiccant Dehumidifier
-
Stackable, quiet, maintenance-friendly.
-
Process air volume: 300 m³/h.
-
Maximum power input: 1,040 watts.
-
Dehumidification capacity: 25.7 kg/24h at 20°C / 60% RH.
-
A real energy-saver: at 20°C / 60% RH only 0.97 kWh/l or 1.05 l/kWh.
-
Combo-counter standard (kWh and operating hours)
ASE 300 Adsorption Dehumidifier
ASE 300 desiccant dehumidifier works on adsorption principle. It is also call as adsorption dehumidifier since desiccant rotor (made up of adsorptive material) used in these units to absorb humidity from air. These type of dehumidifiers use for dehumidification in area with very low temperature.
•Unit fitted with energy efficient redial fan.
•Desiccant rotor used in unit is highly efficient and long life.
•Construction of unit is very compact with casing made up of steel.
•Unit comprised with self regulating PTC heating
•Units can be stackable.
•High-performance ECODRY G3-rotor for maximum water absorption.
•Control panel has on/off witch, work hour counter, energy counter, hygrostat etc.
CtrlTech is exclusive dehumidifier supplier for Aerial make dehumidification units.
Applications of ASE 300 Desiccant Dehumidifier
Water Management Facilities
Dehumidifier is used to avoid corrosion of equipment & damage of buildings at water treatment Facilities. Aerial offer AD 5 series commercial dehumidifier for for industrial dehumidification at water work facilities.
Dehumidifier for Living Spaces
High humidity at homes can cause fungus, molds, bad smell and health issues for you love one. A portable dehumidifier helps to reduce humidity. For bigger home large industrial portable dehumidifier should be use.
Preservation of Artifacts
Air dehumidifier reduces humidity level in Museums, Archives, Exhibitions to protect artifacts and vintage vehicles. Buy dehumidifier from aerial to protect your valuable artifacts from high humidity.
TECHNICAL DATA
Casing
Case made of stainless steel and powder coated sheet steel.
Dehumidifying performance
at 20°C / 60% r.h. = 25.7 kg/d
Liter per kWh
1.05 l/kWh
KwH per Liter
0.97 kWh/l
Power Consumption
1040 W (nominell)
Air flow & ext. Pressure of Dry Air
300 m³/h & 150 Pa
Air flow & ext. Pressure of Regeration Air
110 m³/h & 50 Pa
Operation range
Temperature: -10°C up to +35°C
Noise level
57 dB (A)
Voltage
230 V / 50 Hz
Connecting cable
4.5 mtrs. with plug.
Protection Class
IP23
Control elements
On/Off-switch, Built-in hygrostat for variable humidity control, operation hour and energy counter (MID approved
Optionally available accessories
Hose, Hose Clamp
DIMENTIONS & INSTALLATION
Installation / mobility
Four abrasion-proof rubber feet for floor installation.
Initiation
Put plug into power socket. Switch the dryer on at On/Off switch and set the required humidity at the hygrostat.
Air entry
Process- and regeneration air together Ø 125 mm, through silencer and air filter.
Dry-air Outlet
Hose connector either 1 x Ø 100 mm or 2 x Ø 50 mm (both as a standard).
Regeneration Air-outlet
hose connector Ø 80 mm
Dimensions
Height / width / depth: 330 mm / 335 mm / 430 mm
APPLICANTION & FUNCTIONING
Mode of functioning
Adsorption principle. One common fan for process and regeneration air
Area of use
Building, cavity and water damage drying, drying and ventilation of basements